To install a roof window you will need two boxes: One box with the window itself and one with the flashing appropriate for your roof covering.

You should check the content of each of the boxes before you start the actual installation. Please see below the items you should find in each of the boxes

Inside this box you will find:

Window components

Frame 1 pc

Sash equipped with handle 1 pc ( installed to the frame )

Fittings ( BEIPACK)

Brackets: for fixing the frame to the rafters
4 pcs of zinc galvanized 100 x 70 mm L bracketts ( in case of M8A the beipack contains 6 pcs )

Screws: for fixing the frame to the rafters
18 pcs of zinc galvanized 4 x 30 mm screws ( in case of M8A the beipack contains 24 pcs )

Wedge: for adjusting the frame to the proper plane.
1 pc of 30 x 80 mm black plastic wedge

Cover Parts

2 pcs of cladding parts ( L/R) for bottom front of sash

 

Inside this box you will find:

Window Components

Frame 1 pc

Sash 1 pc ( installed to the frame )

Fittings ( BEIPACK)

Brackets: for fixing the frame to the rafters
4 pcs of zinc galvanized 100 x 70 mm L bracketts ( in case of M8A the beipack contains 6 pcs )

Screws: for fixing the frame to the rafters
18 pcs of zinc galvanized 4 x 30 mm screws ( in case of M8A the beipack contains 24 pcs )

Wedge: for adjusting the frame to the proper plane.
1 pc of 30 x 80 mm black plastic wedge

Handle: in a separate plastic bag
1 pcs of grey lacquered handle with 2 pcs of screws for fixing,

Cover Parts

2 pcs of cladding parts ( L/R) for bottom front of sash

Inside this box you will find:

Window components

Frame 1 pc

Sash equipped with handle
1 pc ( installed to the frame )

Fittings ( BEIPACK)

Brackets: for fixing the frame to the rafters
4 pcs of zinc galvanized 100 x 70 mm L bracketts ( in case of M8A the beipack contains 6 pcs )

Screws: for fixing the frame to the rafters
18 pcs of zinc galvanized 4 x 30 mm screws ( in case of M8A the beipack contains 24 pcs )

Wedge: for adjusting the frame to the proper plane.
1 pc of 30 x 80 mm black plastic wedge

Cover Parts

1 pcs of top cladding specialized for ventilating windows. (The normal top cladding in flashing box can be disposed off)

2 pcs of cladding parts ( L/R) for bottom front of sash

Inside this box you will find:

Window components

Frame 1 pc

Gas springs:

A pair of gas springs (L/R) connected both to the sash and frame.
Strength is differentiated to 125 N for MOEM4A and 250 N for MOEM8A

Sash equipped with handle
1 pc ( installed to the frame )

Fittings ( BEIPACK)

Brackets: for fixing the frame to the rafters
4 pcs of zinc galvanized 100 x 70 mm L brackets ( in case of M8A the beipack contains 6 pcs )

Screws: for fixing the frame to the rafters
18 pcs of zinc galvanized 4 x 30 mm screws ( in case of M8A the beipack contains 24 pcs )

Wedge: for adjusting the frame to the proper plane.
1 pc of 30 x 80 mm black plastic wedge

Cover Parts

2 pcs of cladding parts (L/R) for bottom front of sash

 

Inside this box you will find:

Window components

Frame 1 pc

Gas springs:

A pair of gas springs (L/R) connected both to the sash and frame.
Strength is differentiated to 125 N for MOEM4A and 250 N for MOEM8A

Sash equipped with handle
1 pc ( installed to the frame )

Fittings ( BEIPACK)

Brackets: for fixing the frame to the rafters
4 pcs of zinc galvanized 100 x 70 mm L brackets ( in case of M8A the beipack contains 6 pcs )

Screws: for fixing the frame to the rafters
18 pcs of zinc galvanized 4 x 30 mm screws ( in case of M8A the beipack contains 24 pcs )

Wedge: for adjusting the frame to the proper plane.
1 pc of 30 x 80 mm black plastic wedge

Cover Parts

1 pcs of top cladding specialized for ventilation windows. (The normal top cladding in flashing box can be disposed off)

2 pcs of cladding parts (L/R) for bottom front of sash

 

Inside this box you will find:

Flashing components

Top part of flashing 1 pc

Side parts of flashing 2 pc ( L/R)

Bottom part of flashing with lead apron 1 pc

Tile Support 1 pc
Needs to be hooked on top flashing in proper height for tiles. Depending on particular installation.

Cover parts

Frame side coverings 2 pcs (L/R)

Top covering 1 pc

Bottom covering 1 pc

Frame striking bead covering 2 pcs ( L/R)

Screws, clamps and nails

Black steel screws for top flashing:
3 pcs of 4.5 x 15 mm countersunk pz-2

Clamps for fixing the flashing side and top pieces to the battens:
10 pcs of 0.57 x 60 x 15 mm pre-drilled pre-bendt umber grey lacquered aluminium

Nails for fixing the clamps:
20 pcs of 2.0 x 20 mm of yellow chromated ring nails

Screws for all other cladding parts (in separate bag)
12 pcs of 4 x 25 mm ball head pz-2 screws , 18 mm thread length

Flashing components

Top part of flashing

1 pcs side parts of flashing ( L/R)
10 pcs for 2A
12 pcs for 4A
14 pcs for 6A
16 pcs for 8A

Bottom part of flashing with lead apron 1 pc

Additional top piece 1 pc

Cover parts

Frame side coverings 2 pcs (L/R)

Top covering 1 pc

Bottom covering 1 pc

Frame striking bead covering 2 pcs ( L/R)

Screws, clamps and nails

Black steel screws for top flashing:
3 pcs of 4.5 x 15 mm countersunk pz-2

Nails for fixing the flashing via clamps:
25 pcs of 2.0 x 20 mm of yellow chromated ring nails

Screws for all other cladding parts (in separate bag)
12 pcs of 4 x 25 mm ball head pz-2 screws , 18 mm thread length

 

Flashing components

Top part of flashing 1 pc

Side parts of flashing 2 pc ( L/R)

Bottom part of flashing with high welded long lead apron 1 pc

Tile Support 1 pc
Needs to be hooked on top flashing in proper height for tiles. Depending on particular installation.

Cover parts

Frame side coverings 2 pcs (L/R)

Top covering 1 pc

Bottom covering 1 pc

Frame striking bead covering 2 pcs ( L/R)

Screws, clamps and nails

Black steel screws for top flashing:
3 pcs of 4.5 x 15 mm countersunk pz-2

Clamps for fixing the flashing side and top pieces to the battens:
10 pcs of 0.57 x 60 x 15 mm pre-drilled pre-bent umber grey lacquered aluminium

Nails for fixing the clamps:
20 pcs of 2.0 x 20 mm of yellow chromated ring nails

Screws for all other cladding parts (in separate bag)
12 pcs of 4 x 25 mm ball head pz-2 screws , 18 mm thread length

Box1

Flashing components

Top part of flashing 1 pc

Side part of flashing 1 pc (R)

Bottom part of flashing with apron 1 pc

Middle gutter piece 1 pc
100 mm wide for TCMxA13E/ 140 mm wide for TCMxA13G

Top part to connect the two top flashings

Tile Support 1 pc
Needs to be hooked on top flashing in proper height for tiles. Depending on particular installation.

Cover parts

Frame side coverings 2 pcs (L/R)

Top covering 1 pc

Bottom covering 1 pc

Frame striking bead covering 2 pcs ( L/R)

Screws, clamps and nails

Black steel screws for top flashing:
3 pcs of 4.5 x 15 mm countersunk pz-2

Clamps for fixing the flashing side and top pieces to the battens:
10 pcs of 0.57 x 60 x 15 mm pre-drilled pre-bent umber grey lacquered aluminium

Nails for fixing the clamps:
20 pcs of 2.0 x 20 mm of yellow chromated ring nails

Screws for all other cladding parts (in separate bag)
12 pcs of 4 x 25 mm ball head pz-2 screws , 18 mm thread length

Box3

Flashing components

Top part of flashing 1 pc

Side part of flashing 1 pc (L)

Bottom part of flashing with apron 1 pc

Tile Support 1 pc
Needs to be hooked on top flashing in proper height for tiles. Depending on particular installation.

Cover parts

Frame side coverings 2 pcs (L/R)

Top covering 1 pc

Bottom covering 1 pc

Frame striking bead covering 2 pcs ( L/R)

Screws, clamps and nails

Black steel screws for top flashing:
3 pcs of 4.5 x 15 mm countersunk pz-2

Clamps for fixing the flashing side and top pieces to the battens:
10 pcs of 0.57 x 60 x 15 mm pre-drilled pre-bent umber grey lacquered aluminium

Nails for fixing the clamps:
20 pcs of 2.0 x 20 mm of yellow chromated ring nails

Screws for all other cladding parts (in separate bag)
12 pcs of 4 x 25 mm ball head pz-2 screws , 18 mm thread length